Kluber Unisilkon LCA 3801 1kg Kluber Unisilkon LCA 3801 1kg

You need to get feedback information :
Please contact email: purchase@afc-engineering.com
Hotline (24/7) : (+84)0286.650.1858

S000178 Kluber Lubrication Quantity: 10 pcs

Kluber Unisilkon LCA 3801 1kg

Product code: S000178

You need to get feedback information :
Please contact email: purchase@afc-engineering.com
Hotline (24/7) : (+84)0286.650.1858

Delivery time
Delivery now

Delivery now

Free Ship in Ho Chi Minh 
Support international transport
Delivery now 24h
Product Quality

Product Quality

New Product 100%
Provide Certificates of Origin
Provide Quality of Certificates


Bank transfer
Credit Car Visa
Support 24/7

Support 24/7

Free Support 
Hotline: 0286.650.1858
Chat zalo : 0901.310.004

Product Description :
Unisilkon LCA 3801 is a special lubricating grease neutral in odour and taste and based on silicone oil and a calcium soap. It has been developed primarily for valves and fittings as well as sanitary applications. Unisilkon LCA 3801 provides effective wetting even in narrow lubricating gaps and friction points that are difficult to reach.
Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges.
Unisilkon LCA 3801 is resistant to many media used in the beverage industry and to acid or alkaline disinfectants but not resistant to most organic solvents and strong acids or lyes.
Benefits for your application
For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers
With load-bearing areas between 50 and 99.9 %, good wetting behaviour and good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component
Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²
Very good resistance to both cold and hot water
Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges
Good sealing effect and backflow from "lubricant depot"
Compatible with most ceramics, metals, elastomers and plastics
Approved acc. to DGW-KTW (UBA guideline), NSF 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water
Please contact us with the information below for advice products :
Address : 36/30 Yen The Street , Ward 2 , District Tan Binh , Ho Chi Minh , Vietnam
Tell        : (+84)0286.650.1858  - Hotline :  (+84)901.310.004
Email    : contact@afc-engineering.com  Website : https://afc-engineering.com/
Thanks very much

  Reader Comments



You did not use the site, Click here to remain logged. Timeout: 60 second